Also: My 3 must-have Raspberry Pi accessories The other day I covered adding a touchscreen display to a Raspberry Pi, and one question that popped up from this project was related to cooling. Several readers were worried that cramming a Raspberry Pi and a display controller into a plastic case might cause the hard-working Raspberry Pi to warm up excessively, and that I should add some cooling in the form of a heatsink or even a fan. I’m split on this. One the one hand, I trust that the makers of the Raspberry Pi have put thought into the thermals and designed it to work as it is. On the other hand, I know how easy it is to push a Raspberry Pi really hard, and when the hardware is crammed into a case, things can get a little warm, and so a bit of cooling is cheap insurance against future problems. Also: The 5 best laptop cooling pads
So how hot does a Raspberry Pi get?
If you ever used a Raspberry Pi, then you’ll know they get a bit warm. But how warm? Also: Raspberry Pi: Where to buy the hard-to-find latest model and its alternatives I pulled out my smartphone with a built-in thermal camera and took a look. After pushing the Raspberry Pi hard, I got the temperature to about 40°C (104° F). Note: Ignore that the temperature of the main chip is a cool 20.5°C (68.9°F) – this is down to the metal cap on the chip fooling the thermal camera.
Fitting heatsinks on the Raspberry Pi
OK, let’s fit some heatsinks. They’re cheap – a five-pack is $5 – so they’re not going to break the bank. Each Raspberry Pi can take four heatsinks on the bigger chips. On the bottom of the heatsink is a self-adhesive thermal pad (the blue is a film that covers the adhesive). To fit the heatsink, you peel this blue layer off – probably the hardest bit of this project. Stick them down onto the chips, and you’re done!
So, how well do these heatsinks work?
Before we look at this, here’s some background on how heatsinks work. The job of a heatsink is to take the heat from an important component, like a chip, and dissipate it to the air. Because the heatsink is made of aluminum, it readily soaks up that heat released by the chip (that thermal pad helps to make the transfer more efficient), while the fins machined into the top increase the surface area and allows it to better transfer this heat into the surrounding air. So how do these heatsinks perform? They seem to do a good job. Compare the image above to the earlier image without the heatsinks, and you can see in the first image that the temperature of the board has fallen from almost 40.9°C (105.6°F) to 37.4°C (99.3°F), while that chip in the the image drops from 38.9°C (102.0°F) to 35.0°C (95.0°F). That’s a decent drop in temperature, and for the price, I’m happy with this.
Do you need to add a fan?
There are a lot of fans and cases with fans for Raspberry Pis out there. But do you need to add a fan? While it’s probably overkill for most scenarios, if your Raspberry Pi is on for extended periods, or it’s in a confined spot, then adding a fan can’t hurt (as long as the noise isn’t a problem). Below are some solid options:
